What's New: Past Year

Resources feed

  1. Initial failure strength prediction of woven composites using a new yarn failure criterion constructed by deep learning

    05 Jun 2019 | Contributor(s):: Xin Liu, Federico Gasco, Johnathan Goodsell, Wenbin Yu

    A new failure criterion for fiber tows (i.e. yarns) is developed based on a micromechanical model using mechanics of structure genome (MSG) and deep learning neural network. The proposed failure criterion can be applied to yarns in mesoscale textile composites modeling while capturing the failure...

  2. MSC.Patran/Nastran-SwiftComp GUI

    01 Apr 2019 | Contributor(s):: Xin Liu, Wenbin Yu

    A graphical user interface (GUI) has been developed to integrate SwiftComp into MSC.Patran/Nastran for constitutive modeling and providing the automated conversion of the MSG plate and beam stiffness matrix into MSC.Nastran shell and beam element properties and materials. In order to reduce...

  3. Introduction to Composites Manufacturing

    15 Feb 2019 | Online Presentations | Contributor(s):: Michael Texeira

  4. Introduction question and answer

    15 Feb 2019 | Online Presentations | Contributor(s):: Michael Texeira

  5. Fundamentals of Composites Analysis August 6

    15 Feb 2019 | Online Presentations | Contributor(s):: Michael Texeira

  6. Fundamentals of Composites Analysis August 6 Part 2

    15 Feb 2019 | Online Presentations | Contributor(s):: Michael Texeira

  7. Composites on the 3DExperience Platform

    15 Feb 2019 | Online Presentations | Contributor(s):: Michael Texeira

  8. Chuck Tucker UIUC CDM Hub

    15 Feb 2019 | Online Presentations | Contributor(s):: Michael Texeira

  9. CDM Hub Breakout Sessions Introduction

    15 Feb 2019 | Online Presentations | Contributor(s):: Michael Texeira

  10. Anousch Poursartip UBC CDM Hub

    15 Feb 2019 | Online Presentations | Contributor(s):: Michael Texeira

  11. CDM Hub Breakout Sessions 1 and 2 B-Roll

    15 Feb 2019 | Online Presentations | Contributor(s):: Michael Texeira

  12. Carmelo LoFaro Cytec CDM Hub

    15 Feb 2019 | Online Presentations | Contributor(s):: Michael Texeira

  13. CDM HUB Breakout Sessions

    15 Feb 2019 | Online Presentations | Contributor(s):: Johnathan Goodsell (editor), Byron Pipes

    Breakout sessions from the May 2013 Composites Design and Manufacturing HUB workshop

  14. Poursartip UBC

    15 Feb 2019 | Online Presentations | Contributor(s):: Johnathan Goodsell (editor), Anoush Poursartip

    Presentation at the May 2013 Composites Design and Manufacturing HUB workshop

  15. Young Boeing

    15 Feb 2019 | Online Presentations | Contributor(s):: Johnathan Goodsell (editor), Jerry Young

    Presentation at the May 2013 Composites Design and Manufacturing HUB workshop

  16. Gillespie CCM

    15 Feb 2019 | Online Presentations | Contributor(s):: Johnathan Goodsell (editor), John Gillespie

    Presentation at the May 2013 Composites Design and Manufacturing HUB workshop

  17. Schoeppner AFRL

    15 Feb 2019 | Online Presentations | Contributor(s):: Johnathan Goodsell (editor), Greg Schoeppner

    Presentation at the May 2013 Composites Design and Manufacturing HUB workshop.

  18. Hubert McGill

    15 Feb 2019 | Online Presentations | Contributor(s):: Johnathan Goodsell (editor), Pascal Hubert

    Presentation at the May 2013 Composites Design and Manufacturing HUB workshop

  19. Schuett Dassault

    15 Feb 2019 | Online Presentations | Contributor(s):: Johnathan Goodsell (editor), Ove Schuett

    Presentation at the May 2013 Composites Design and Manufacturing HUB workshop

  20. Greg Schoeppner CDM Hub

    15 Feb 2019 | Online Presentations | Contributor(s):: Michael Texeira