jihun kim @ 3:23 am on 03 Jan 2024
hellow
thermoelastic
When using prevabs, are there any flags that need to be entered in addition to entering 'cte' on the material?
Reply Report abuse
jihun kim @ 11:00 pm on 07 Jan 2024 — Edited @ @ 11:02 pm on 07 Jan 2024
input_file
composite-beam--2-.txt
871 B Click to download
jihun kim @ 11:03 pm on 07 Jan 2024
material_file
composite-beam-material.txt
2 KBClick to download
jihun kim @ 1:15 am on 08 Jan 2024
I expected related results to come out like swiftcomp in the picture, but they didn't.
Su Tian @ 10:01 pm on 09 Jan 2024
Hello Jihun,
At this moment, only the SwiftComp format has been implemented for the thermal related inputs.
In this case, there are two places you need to make some changes (files are attached).
1. Use "<physics>1</physics>" in the "<analysis>" section to indicate that this is a thermoelastic analysis.
2. Use "<a>4.28E-06</a>" instead of "<a11>" in the "<cte>" section for your materials if they are isotropic.
composite-beam.zip
499 KBClick to download
jihun kim @ 3:51 am on 10 Jan 2024
thank you
What are the commands for execution? ‘Thermal Stress Resultants’ etc. are not output with the command below.
prevabs -sc -i composite_beam.xml -h -v -e
Report abuse
jihun kim @ on
hellow
thermoelastic
When using prevabs, are there any flags that need to be entered in addition to entering 'cte' on the material?
Reply Report abuse
jihun kim @ on — Edited @ @ on
input_file
composite-beam--2-.txt
871 B Click to download
Reply Report abuse
jihun kim @ on
material_file
composite-beam-material.txt
2 KBClick to download
Reply Report abuse
jihun kim @ on
I expected related results to come out like swiftcomp in the picture, but they didn't.
Reply Report abuse
Su Tian @ on
Hello Jihun,
At this moment, only the SwiftComp format has been implemented for the thermal related inputs.
In this case, there are two places you need to make some changes (files are attached).
1. Use "<physics>1</physics>" in the "<analysis>" section to indicate that this is a thermoelastic analysis.
2. Use "<a>4.28E-06</a>" instead of "<a11>" in the "<cte>" section for your materials if they are isotropic.
composite-beam.zip
499 KBClick to download
Reply Report abuse
jihun kim @ on
thank you
What are the commands for execution? ‘Thermal Stress Resultants’ etc. are not output with the command below.
prevabs -sc -i composite_beam.xml -h -v -e
Report abuse