Tags: Micromechanics

All Categories (1-20 of 30)

  1. MSG-based Multiscale Modeling for Solids

    05 Jul 2019 | Contributor(s):: Wenbin Yu

    First lecture on Day 3 of the Summer course at Wuhan University of Technology

  2. Is it possible to homogenize aperiodic/partially periodic structures using 3D FEA?

    Closed | Responses: 1

    Dear sir, 
    apart from MSG? is there any alternate way to predict effective properties using 3D FEA  for aperiodic/ partially structures such as honeycomb core, circular fiber...


  3. which micromechanic model

    Closed | Responses: 1


  4. Composite Stiffness Property Prediction

    07 Aug 2017 | Contributor(s):: Joshua Morris

    Micromechanical models for the composite axial tensile, transverse tensile, and axial shear are combined into one tool with the objective of comparing their effectiveness as property prediction methods.  Rule of mixtures models (ROM) and the composite cylinder model (CCM) results for...

  5. Finite element unit cell model based on ABAQUS for fiber reinforced composites

    26 Jul 2017 | Contributor(s):: Tian Tang

  6. Micromechanical investigations of polymer matrix composites with shape memory alloy reinforcement

    18 Jul 2017 | Contributor(s):: Tian Tang

  7. Numerical characterization of effective fully coupled thermo-electro-magneto-viscoelastic-plastic response of smart composites

    18 Jul 2017 | Contributor(s):: Tian Tang

  8. Computational evaluation of effective stress relaxation behavior of polymer composites

    11 Jul 2017 | Contributor(s):: Tian Tang, Sergio D. Felicelli

    This paper presents a micromechanics model to characterize the effective stress relaxationstiffness of polymer composites. The linear viscoelastic behavior of polymer material wasmodeled by hereditary integral. The proposed model was established based on thevariational asymptotic method for unit...

  9. MUL2-UC Beam modeling of periodically heterogeneous composites

    13 Jun 2017 | Contributor(s):: Alberto Garcia de Miguel

    The micromechanics code MUL2-UC is developed to work as an efficient and high-fidelity tool for the computation of the effective stiffness matrix and the recovering of the local fields of periodically heterogeneous composite structures. The main novelty is that higher-order beam theories are...

  10. Mechanics of Structure Genome: Fill the Gap between Materials Genome and Structural Analysis

    18 May 2016 | Contributor(s):: Wenbin Yu

    This is the presentation given as a Purdue Solid Mechanics Seminar on 5/18/2016. It summarizes the most recent devleopments up to the time of presentation. 

  11. 2015 cdmHUB Workshop

    05 Jan 2016 | | Contributor(s):: Johnathan Goodsell

    Composites Design, Analysis and Manufacturing Workshop held at Purdue University on November 3-5, 2015.  Both lectures slides and lecture videos are presented.

  12. SwiftComp Examples

    19 Nov 2015 | | Contributor(s):: Wenbin Yu

    These document contains the examples which could be used to get familiar with SwiftComp.

  13. Introduction to Micromechanics

    14 Nov 2015 | | Contributor(s):: Wenbin Yu

    This article provides a brief introduction to micromechanics using linear elastic materials as an example. The fundamental micromechanics concepts including homogenization and dehomogenization, representative volume element (RVE), unit cell, average stress and strain theories, effective...

  14. Presentation of Micromechanics Simulation Challenge Level I Initial Results

    04 Aug 2015 | | Contributor(s):: Andrew J Ritchey, Johnathan E Goodsell, Hamsasew Sertse, Wenbin Yu, Byron Pipes

    The attached slides summarize the Micromechanics Simulation Challenge Level I Initial Results in a presentation format. The complete report can be found at https://cdmhub.org/resources/948, and all the files supporting the results can be found...

  15. Skill of Using Surface Element in ANSYS

    26 Mar 2015 | | Contributor(s):: Fang Jiang

    Dear All, For those ANSYS users, please check the attached skill of using surface element, “Surface_Effect_Elements.pdf”, to apply the surface tangent traction. It works well for homogenization simulations, and also for some beams structure validations. This attached zip file also...

  16. Micromechanics 5: Dehomogenization

    05 Mar 2015 | | Contributor(s):: Johnathan Goodsell

    Lecture for 3/6/15

  17. Micromechanics 4: Halpin-Tsai and Self-Consistent Models

    02 Mar 2015 | | Contributor(s):: Johnathan Goodsell

    Lecture for 3/2/15

  18. Micromechanics 3: Hybrid Voigt and Reuss Model

    18 Feb 2015 | | Contributor(s):: Johnathan Goodsell

    Lecture for 2/20/15

  19. Micromechanics 2: Voigt and Reuss Models

    17 Feb 2015 | | Contributor(s):: Johnathan Goodsell

    Lecture for 2/18

  20. Micromechanics 1: Effective Elastic Property Predictions

    13 Feb 2015 | | Contributor(s):: Johnathan Goodsell

    Lecture for 2/16