Close

Forum

PreVABS 1.4.3 Released

  1. Su Tian

    PreVABS 1.4.3 is now available at cdmHUB - The Composites HUB - Resources: PreVABS: About.

    (For VABS 4.0 and SwiftComp 2.1)

    Changes of this update:

    • Fixed the issue of plotting element stress and strain results.
    • Fixed the issue of plotting dehomogenization results with quadratic elements.
    • Added groups for different stress and strain plots.
    • Added alternative tag names for material strength properties.
    • Added visualization for initial failure analysis results.
    • Added a new example for initial failure analysis (ex_uh60a_f).
    • Simplified and unified material strength inputs for different types of materials.
    • Updated the section of material strength property input in the documentation.

    Reply Report abuse

    Replying to Su Tian

    1. Kevin Wang

      Thanks Su!

      Can you confirm what results we should be seeing with the example file ex_uh60a_f?

      I'm getting a max failure index of 1.1276066E+009 and a min strength ratio of 2.9779760E-005 at element 14081.

      Reply Report abuse

      Replying to Kevin Wang

      1. Su Tian

        Kevin,

        There was a small issue in the code. I have fixed it. Please download and try it again. Thank you.

        Report abuse

      2. Kevin Wang

        Hey Su,

        Thanks! I downloaded the latest version and gave it a try

        -d -e -v first, results look reasonable

        -fi -e -v second, .fi file looks reasonable.  Min strength ratio of 0.814 @ element 18252 with a corresponding failure index of 1.492

        Visualization of the strength ratio looks correct, however the failure index looks similar to what Dana saw below.  The .fi file has all the failure indices populated for each element, so looks to purely be a plotting error?

        Let me know if you run into the same issue

        Report abuse

      3. Su Tian

        Kevin,

        Yes. This is just a plot setting issue. I just fixed it. You can download and try it again.

        Report abuse

      4. Kevin Wang

        Awesome, looks like that fixed it!

        Thanks

        Report abuse

    2. Wenbin Yu

      Looks unrealistic to me. Su, you might want to create a more realistic example instead. 

      Reply Report abuse

      Replying to Wenbin Yu

    3. Dana Frye

      Hey Su, 

      Thanks for all the help here. I had a couple questions. I downloaded prevabs 1.4.3 after your message above to re-download. I ran the uh60a example, first prevabs –i uh60a.xml -h -e -v, then prevabs –i uh60a.xml -d -fi -e -v.

      For the second dehomogenization / failure index run, all the stress and strain plots, both material and global, as well as the failure index plot, appear blank (see figure).

      Note that the strength ratio plot is not blank, and looks more reasonable (fringe scale from 0.814 to 8.14).

      Thanks, 

      Dana

       

      uh60a-d-fi.png

      Cancel Report abuse

      Replying to Dana Frye

      1. Su Tian

        Dana,

        At this moment, the code does not support calling '-d' and '-fi' using a single command. You need to run them separately. This feature may require updates from both VABS and PreVABS in the future.

        Report abuse

    4. Dana Frye

      Hey ya'll, 

      So I just downloaded the latest version, and even when running '-d' and '-fi' seperately, I am still seeing blank plots for stress, strain, displacement, and failure index. I do see the strength ratio plot. Any ideas? I see the latest version solved the problem for Kevin. 

      Reply Report abuse

      Replying to Dana Frye

      1. Dana Frye

        Here's what I mean by blank plots

        xiLrZFJAxx.png

        Report abuse

      2. Kevin Wang

        If you open your .msh file, does it populate with numbers?  I've uploaded mine if you wanted to do a quick comparison

        Edit: sorry it looks like the file wasn't part of the approved extensions.  I've zipped it to circumvent the rule

        Report abuse