Dear All, there are two channels for you to follow our research.
1. We started a newsletter called Thoughts on Composites Modeling on LinkedIn. Please subscribe to it to get informed about our research and ideas we want to share with the community.
2. We moved our discussion forum to github at wenbinyugroup · Discussions · GitHub as it has more features which can serve you better.
Wenbin
Byeonguk Im @ on
Dear prevabs developers,
Hello, I think there is a serious bug when creating an I-beam section using the latest released prevabs 1.4.3.
Please find the attached figure.
The "T" connections to both the upper and lower baselines are not working.
However, I found that the previous prevabs 0.5 had an I-beam example, where the web segment is assigned a higher level.
Therefore, is there something I have mistakes on it? Or is there any examples to create an I-beam section using the latest prevabs?
Looking forward to hearing from you.
xml files attached.
<cross_section name="X_1">
<include>
<baseline>baselines</baseline>
<material>materials</material>
<layup>layups</layup>
</include>
<analysis>
<model>1</model>
</analysis>
<general>
<translate>0.00 0.00</translate>
<scale>1.000000</scale>
<rotate>0.000000</rotate>
<mesh_size>0.0050</mesh_size>
<element_type>linear</element_type>
</general>
<component name="plate_upper" >
<segment name="sgplate_upper">
<baseline>bl_upper</baseline>
<layup direction="right">layup1</layup>
</segment>
</component>
<component name="plate_lower" >
<segment name="sgplate_lower">
<baseline>bl_lower</baseline>
<layup direction="right">layup1</layup>
</segment>
</component>
<component name="web2" depend = "plate_upper, plate_lower">
<segment name="sg_web_2">
<baseline>bl_foam2</baseline>
<layup direction="right">layup3</layup>
</segment>
</component>
</cross_section>
------------
<baselines>
<basepoints>
<include>basepoints</include>
</basepoints>
<baseline name="bl_upper" type="straight">
<points>p1,p2</points></baseline>
<baseline name="bl_lower" type="straight">
<points>p3,p4</points></baseline>
<baseline name="bl_foam" type="straight">
<point>fill</point><angle>90</angle></baseline>
<baseline name="bl_foam2" type="straight">
<point>fill2</point><angle>90</angle></baseline>
<baseline name="bl_foam3" type="straight">
<point>fill3</point><angle>90</angle></baseline>
</baselines>
------------------
p1 -0.0790 0.0230
p2 0.0790 0.0230
p3 0.0790 -0.0230
p4 -0.0790 -0.0230
fill -0.0740 -0.0100
fill2 -0.0290 -0.0100
fill3 0.0550 -0.0100
Reply Report abuse
Su Tian @ on
Thank you for your feedback! This is a known issue and will be fixed in the next version (1.5).
Reply Report abuse