Prof. Yu's Research Group in the Cloud

The SG of fiber-reinforced composites can be represented as shown below.

Let the material properties of the fiber and matrix be: Fiber: E₁₁ =230 GPa, E₂₂ =15 GPa, G₁₂=G₁₃ =15GPa, G₂₃ =7GPa, v₁₂=v₁₃ =0.2000 ν₂₃ =0.0714.

Matrix: E =4.0GP, ν=0.35

Fiber volume of fraction is assumed to be 60% The material properties are obtained from: “Soden, P. D., Hinton M. J. and Kaddour, A. S., Lamina properties, lay-up configurations and loading conditions for a range of fibre reinforced composite laminates. Compos. Sci. Technol., 1998, 58(7), 1011”

Step 1: Input Material Properties

There are two materials namely fiber and matrix

Step 2: Select appropriate SG

a. Select 2D SG that represent the current example

b. 2D SG wizard shows up
c. Select Square pack as microstructure
d. Add fiber volume fraction
e. Select material properties for fiber and matrix
f. Click on OK to generate the SG
g. See generated 2D SG

Step 3- Homogenization- 3D effective Properties
a. Click on Homogenization

b. Homogenization Wizard shows up ( see below)
c. Select 3D (solid) Model
d. Select analysis type, elastic
e. Click on OK to start homogenization
f. See the predicted 3D effective properties
(Image(problem-2H.jpg) failed - File not found)

Created on 22 Jul 2018, Last modified on 23 Jul 2018